自上料攪拌車停機時的要有保障！
自上料攪拌車的運行要遵守一定的方式方法，這樣才能更加順利的進行施工，而且對操作人員也會有保障。那么自上料攪拌車停機時要注意什么？
The operation of the mixing truck should comply with certain ways and methods, so as to carry out the construction more smoothly, and there will be safety guarantee for the operator. So what should be paid attention to when the feeding mixer stops?
啟動自上料攪拌車前須先檢查機油、潤滑油和冷卻水等物料是否充足，及時進行添加。車子啟動后，低速旋轉罐體，繞車一周檢測胎壓，防止有漏氣車胎，用工具拿掉卡在輪胎中石子等雜物。
Check whether the oil, lubricating oil, cooling water and other materials are sufficient before starting the self-feeding agitator and add them in time. After the car starts, rotate the tank at low speed, detect tire pressure around the car, prevent a leaky tire, remove the stone and other debris stuck in the tire with tools.
其次檢驗燈光是否正常，務必保證照著輪胎邊緣，防止被工地堆放的鋼筋雜物割傷。清理干凈后視鏡和窗戶玻璃，司機保持清晰開闊視野，以應對工地的復雜工況場景。
Next check whether the light is normal, be sure to ensure that according to the tire edge, to prevent the site stacked steel debris cut. Clean the rearview mirror and window glass, and the driver keeps a clear and open vision to cope with the complex working scene of the construction site.
自上料攪拌車廠家提醒大家，自動攪拌車停在平地上，再將鏟斗平放地面。設備熄火以后，需要多次扳動工作裝置操縱手柄，來保證液壓缸是在休眠的狀態。手柄一定要放置在空擋中。
Since the feeding mixer manufacturer reminds you that the automatic mixer is parked on the level, and then the bucket is flat on the ground. After the equipment flameout, it is necessary to pull the operating device handle for several times to ensure that the hydraulic cylinder is in the dormant state. The handle must be placed in neutral.
拿走電鎖的鑰匙以后，在關閉總電源和門窗。停車時要注意不要在高溫的地方，防止輪胎溫度過高引起事故。組合閥或儲氣罐對輪胎進行充氣的時候，人應該遠離輪胎，防止爆炸受傷。
After removing the key of the electric lock, turn off the main power supply and doors and Windows. When parking, pay attention to not in high temperature places, to prevent the tire temperature is too high to cause accidents. When the tire is inflated by a combination valve or gas tank, the person should stay away from the tire to prevent explosion injury.
另外，自上料攪拌車高，高速行駛?cè)菀装l(fā)生事故。入彎之前提前減速減擋，盡量別在拐彎的時候踩剎車。隨時注意觀察攪拌罐是否在轉，把轉速盡量調慢。
In addition, the center of gravity of the mixing truck is high, and accidents are easy to happen at high speed. Slow down before entering a corner, and try not to brake when turning. Always pay attention to observe whether the stirring tank is turning, the speed as slow as possible.
自上料攪拌車停機時的要有保障！更多內容就來我們網站www.zvmc.cn進行咨詢，我們這里有的人員為您解答疑惑！
Safety should be guaranteed when the feeding mixer stops! For more information, come to our website www.zvmc.cn for consultation. We have professional staff here to answer your questions!
