檢查攪拌車磨損你有哪些技巧？
熔化百劍而成，柄芒不分，攻守不定。形又細又長，可藏于竹竿中，一旦出鞘寒光閃現，顫動如飛瀑流水，因而得名---天瀑劍！自動上料攪拌車猶如一把天瀑劍，集上料、攪拌于一體，可智能配料上料，還能自動裝載攪拌，是真正的一體機，小巧、靈活、省時、省力、省場地！對于它的磨損檢查也有一定的嚴格要求，具體是什么呢？不妨我們一起去看看吧！
It is made by melting hundreds of swords. The handle and awn are not divided, and the attack and defense are uncertain. It is thin and long and can be hidden in a bamboo pole. Once it is out of the sheath, the cold light flashes and vibrates like a waterfall. Therefore, it is named Tianbao sword! The automatic feeding mixer is like a heavenly waterfall sword, which integrates feeding and mixing. It can intelligently feed and automatically load and mix. It is a real all-in-one machine, small, flexible, time-saving, labor-saving and site-saving! There are certain strict requirements for its wear inspection. What are the specific requirements? Let's go and have a look!
，針對攪拌車的具體磨損情況，我們應觀察機油顏色、品質方面是否出現問題，觀察外表是否存在鐵屑，檢查機油粘性。若機油中存在很多鐵屑，則說明曲軸瓦、連桿瓦位置出現嚴重磨損情況。若機油呈現粘稠狀態，說明機油已經有很長時間卻未經過更換。
Firstly, according to the specific wear of the mixer truck, we should observe whether there are problems in the color and quality of the engine oil, observe whether there are iron filings on the surface, and check the viscosity of the engine oil. If there are a lot of iron filings in the engine oil, it indicates that the crankshaft bearing bush and connecting rod bush are seriously worn. If the oil is viscous, it means that the oil has not been changed for a long time.
在拆開連桿活塞的曲軸時，觀察連桿瓦、曲軸瓦具體狀況，整機均不可使用。若磨損情況不嚴重，可讓其經過磨軸加工后，自動上料攪拌車方可使用。
When disassembling the crankshaft of connecting rod piston, observe the specific conditions of connecting rod pad and crankshaft pad. The whole machine can not be used. If the wear is not serious, the automatic feeding mixer can be used only after grinding the shaft.
觀察氣缸套的具體磨損情況，在拆開缸套時，禁止打到發動機機體，避免出現嚴重?fù)p壞情況。
Observe the specific wear of the cylinder liner. When disassembling the cylinder liner, it is forbidden to hit the engine body to avoid serious damage.
對于自動上料攪拌車來說，在整個維修期間，每個動作都應謹慎小心，任何一個細節的錯誤都會致使發動機不能達到正常工作狀態，因此在對自動上料攪拌車維修時，應請的技術人員進行，避免出現更大失誤。
For the automatic feeding mixer truck, each action should be careful during the whole maintenance period. Any error in any detail will cause the engine to fail to reach the normal working state. Therefore, professional technicians should be invited to repair the automatic feeding mixer truck to avoid greater mistakes.
