久久亚洲中文字幕精品有坂深雪,欧洲精品无码一区二区三区在线播放,日韩人妻无码精品系列专区,青青草原精品国产亚洲AV

自上料攪拌車廠家直銷

品質創造未來,愛上中科聚峰造

全國咨詢熱線
400-879-1999
當前位置:首頁 »新聞中心 » 公司新聞如何減少中科聚峰混凝土攪拌車的磨損

如何減少中科聚峰混凝土攪拌車的磨損

來源:http://www.zvmc.cn 瀏覽:0發表時間:2020-03-10
  中科聚峰混凝土攪拌車應用廣泛,在使用混凝土攪拌機時,磨損是不可避免的,磨損會影響設備的生產效率,所以在生產過程中重要的一點就是盡量減少混凝土攪拌機的磨損。
  Zhongke Jufeng concrete mixer is widely used. When using concrete mixer, abrasion is inevitable, which will affect the production efficiency of the equipment. Therefore, the most important point in the production process is to minimize the abrasion of concrete mixer.
  初次個是混凝土攪拌機的潤滑,有很多的潤滑需求,潤滑劑的方法和數量是不一樣的,有時還需要更換一個新的潤滑劑,也需要定期、定量假潤滑劑,用戶必須理解這些潤滑技術,以確?;炷翑嚢铏C(jī)的潤滑。
  The first is the lubrication of concrete mixer. There are a lot of lubrication requirements. The method and quantity of lubricants are different. Sometimes, a new lubricant needs to be replaced. It also needs regular and quantitative fake lubricants. Users must understand these lubrication technologies to ensure the lubrication of concrete mixer.
中科聚峰
  混凝土攪拌機易磨損的部位有振動篩、攪拌葉片、攪拌面和攪拌筒。如何減少這些地方的磨損?振動篩磨損和振動軸承時,用戶必須選用軸承,潤滑裝置要合理,用戶必須經常對軸承進行潤滑;由于攪拌槳需要攪拌混凝土,一般磨損嚴重,要求用戶在添加材料時注意避免攪拌缸內較大的硬物或鋼絲等物體,并經常對攪拌槳進行維護;混凝土攪拌表面磨損的可能原因有微震、滑動、沖擊、磨損、銹蝕等。這就要求使用者在使用時要注意,避免碰撞,保持表面清潔。攪拌桶也經常磨損,這就要求用戶在工作結束后立即清洗攪拌桶,防止攪拌桶內的混凝土凝固。
  The easily worn parts of concrete mixer include vibrating screen, mixing blade, mixing surface and mixing drum. How to reduce the wear of these places? When the vibrating screen is worn and the vibrating bearing is worn, the user must select the high-quality bearing, the lubricating device must be reasonable, and the user must often lubricate the bearing; As the mixing paddle needs to mix concrete, the general wear is serious. Users are required to pay attention to avoid large hard objects or steel wires and other objects in the mixing cylinder when adding materials, and often maintain the mixing paddle; the possible causes of concrete mixing surface wear are micro vibration, sliding, impact, wear, corrosion, etc. This requires users to pay attention to avoid collision and keep the surface clean. The mixing bucket is often worn, which requires the user to clean the mixing bucket immediately after the end of work to prevent the concrete in the mixing bucket from setting.
  以上是中科聚峰混凝土攪拌車廠家為大家介紹的相關內容,想要了解更多內容,歡迎訪問網站:http://www.zvmc.cnThe above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete mixer for you. To learn more, please visit the website: http://www.zvmc.cn