攪拌車底盤易出現問題的部位主要會集在哪里？
從使用全自動攪拌車的角度來看，攪拌車底盤部件實際上比發動機更容易出問題，但在例行保養時，很多人往往忽視了對底盤部件的查看。攪拌車底盤易出現問題的部位主要會集在哪里？全自動攪拌車廠家為您講解：
From the perspective of using the fully automatic mixer, the chassis components of the mixer are actually more prone to problems than the engine, but many people often ignore the inspection of the chassis components during routine maintenance. Where are the parts of the mixer chassis prone to problems? The manufacturer of the fully automatic mixing truck explains to you:
1、減震器：攪拌車漏油是減震器損壞的前兆，另外在壞路面上行駛顛簸明顯加重或制動間隔變長也是減震器損壞的征兆。
1. Shock absorber: The oil leakage of the mixer is the precursor of shock absorber damage. In addition, the driving bumps on the bad road surface are significantly increased or the braking interval is longer, which is also the precursor of shock absorber damage.
2、懸架操控臂膠套：膠套損壞后車輛將出現跑偏、打擺等一系列問題，即便做四輪定位也無濟于事。假如仔細查看底盤，膠套損壞很容易發現。
2. Suspension control arm rubber sleeve: After the rubber sleeve is damaged, the vehicle will have a series of problems, such as deviation and sway, even if the four-wheel alignment is useless. If you check the chassis carefully, it is easy to find the rubber sleeve damage.
3、轉向拉桿：轉向拉桿松弛的話就會對汽車的轉向操控形成影響，能夠通過抓住拉桿，用力搖晃來判斷轉向拉桿是否有異常，假如出現了晃動，那么就說明有異常，要立即替換球頭或拉桿總成。
3. Steering rod: if the steering rod is loose, it will affect the steering control of the car. You can judge whether the steering rod is abnormal by grasping the rod and shaking it vigorously. If there is shaking, it indicates that there is abnormal. Replace the ball head or rod assembly immediately.
4、排氣管：水泥攪拌車排氣管是車底容易受損的部件之一，檢修時別忘了看一眼。尤其是帶三元催化器的排氣管，更應仔細檢查。平常為了維護全自動攪拌車底盤，能夠給攪拌車底盤做個底盤裝甲，這樣就能夠起到很好的維護底盤的效果，在行進時也要留意防止讓全自動攪拌車底盤受到碰擊。
4. Exhaust pipe: The exhaust pipe of the cement mixer is one of the parts that are easy to be damaged at the bottom of the car. Don't forget to take a look at it during maintenance. Especially the exhaust pipe with three-way catalytic converter should be carefully checked. In order to maintain the chassis of the fully automatic mixer truck, we can make a chassis armor for the chassis of the mixer truck, which can play a good role in maintaining the chassis. We should also pay attention to prevent the chassis of the fully automatic mixer truck from being hit when moving.
5、萬向節防塵套：別小看攪拌車萬向節外面的防塵套，它不僅有防塵效果，還能避免萬向節周圍的潤滑脂流失，防塵套一旦破損，潤滑脂很快就會流失，由于干磨，萬向節很容易損壞。
5. Universal joint dust boot: Don't look down on the dust boot outside the universal joint of the mixer truck. It not only has the dust prevention effect, but also can prevent the grease loss around the universal joint. Once the dust boot is damaged, the grease will soon lose. The universal joint is easily damaged due to dry grinding.
攪拌車底盤易出現問題的部位主要會集在哪里？以上就是問題的相關解答內容了，希望能夠幫助到您，還有什么問題就來我們網站http://www.zvmc.cn咨詢吧！
Where are the parts of the mixer chassis prone to problems? The above is the relevant answer to the question. I hope it can help you. If you have any questions, please come to our website http://www.zvmc.cn Ask!
