攪拌車在操作之前的五個檢查方面
混凝土自上料攪拌車在使用之前為了確保正常的運行過程，需要對設備提前做一定檢查工作的。那么接下來就跟著混凝土自上料攪拌車廠家一起了解一下當設備在運行之前有哪些問題是需要我們檢查了解的。
In order to ensure the normal operation process of the concrete self loading mixer before use, it is necessary to check the equipment in advance. Then we will follow the manufacturer of concrete self feeding mixer truck to find out what problems we need to check before the equipment is put into operation.
1、蓄電池的保養檢查：檢查蓄電池固定是否牢固。
1. Maintenance and inspection of battery: check whether the battery is firmly fixed.
2、輪胎的檢查：每月應在常溫下檢查一下輪胎氣壓。
2. Tyre inspection: check the tyre pressure at room temperature every month.
3、離合器總泵液面的檢查：離合器液面介于高、低液面間則表示正常，如果低于標準線，則可能是總泵或分泵皮碗損壞。
3. Check the liquid level of the clutch master cylinder: if the liquid level of the clutch is between high and low, it indicates that it is normal. If it is below the standard line, it may be that the master cylinder or slave cylinder cups are damaged.
4、制動液面的檢查：制動也在高、低位之間則表示正常。
4. Check the brake fluid level: if the brake fluid level is between high and low, it means that it is normal.
5、發動機冷卻液液面檢查：發動機在熱機狀態時，千萬不要打開散熱器蓋，否則可能會被濺出的冷卻液或高溫蒸氣燙傷。等發動機冷卻后，檢查冷卻液的液面應處于滿位和低位之間，否則應加蒸餾水或純凈水或冷凍液，加水后的液面高度不能超過滿位。如發現短時間內冷卻液減少的很快攪拌，混凝土自上料攪拌車檢查步驟應檢查冷卻系統是否有泄漏或到維修站去檢查。
5. Check the engine coolant level: Never open the radiator cap when the engine is hot, or you may be scalded by the spilled coolant or high temperature steam. After the engine cools down, check that the coolant level should be between full and low, otherwise add distilled water or purified water or refrigerant, and the liquid level after adding water should not exceed full. If it is found that the cooling liquid decreases in a short time and the concrete is mixed quickly, the concrete shall be inspected from the charging mixer truck to check whether the cooling system leaks or go to the maintenance station to check.
自動上料攪拌機操作環境通常都不是很好，這也導致需要我們對設備在操作之前有詳細的了解才行。在確保設備不存在有任何故障問題之后才能夠操作使用設備正常運行，避免在操作中可能存在的各種不良問題。關注我們http://www.zvmc.cn了解更為詳細的內容！
The operating environment of the automatic feeding mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. The equipment can only be operated and used normally after ensuring that there are no faults in the equipment, so as to avoid various adverse problems that may exist in the operation. Follow us http://www.zvmc.cn Learn more!
