當前位置：首頁 »新聞中心 » 公司新聞中科攪拌車:自動上料攪拌車主機多久清理一次好呢？

中科攪拌車:自動上料攪拌車主機多久清理一次好呢？

來源：http://www.zvmc.cn 瀏覽：0發表時間：2020-12-22

自動上料攪拌車,是一種結合了混凝土運輸車和混凝土攪拌站功能為一體,集混凝土裝料、計量、攪拌、出料于一身,并可實現混凝土運輸和現場混凝土施工作業的攪拌設備。那么中科攪拌車主機多久清理一次合適呢？

Automatic loading mixer is a kind of mixing equipment which combines the functions of concrete transport vehicle and concrete mixing station, integrates concrete loading, metering, mixing and discharging, and can realize concrete transportation and on-site concrete construction. So, how often is it appropriate to clean the main engine of China Science mixer?

自動上料攪拌車的控制技術要求

Technical requirements for control of automatic feeding mixer

1.各筒體，控制閥，電機按混凝土攪拌過程的要求運行，各筒體，控制閥，電機的控制要準確，穩定，可靠。自上料混凝土攪拌車廠家它可裝運由攪拌廠（站）生產的混凝土或按配比混合的骨料（砂、石子）、水泥和水，在運輸過程中，不斷對濕料慢慢攪拌，防止混凝土在運輸過程中初凝和離析。

1. Each cylinder, control valve and motor shall operate according to the requirements of concrete mixing process, and the control of each cylinder, control valve and motor shall be accurate, stable and reliable. From the manufacturer of loading concrete mixer, it can transport concrete produced by mixing plant (station) or aggregate (sand, stone), cement and water mixed according to the proportion. During transportation, wet materials are mixed slowly to prevent initial setting and segregation of concrete during transportation.

控制系統有自動和手動兩種工作方式，它們相互獨立，相互制約。

The control system has two working modes, automatic and manual, which are independent and restrict each other.

2.系統發展具有一個良好的抗干擾能力和完善的報警自保護管理功能.

2. The system has a good anti-interference ability and perfect alarm self-protection management function

3.通過與計算機通訊,可以進行顯示信息系統管理工作狀態、故障報警.

3. Through communication with computer, it can display information system, manage working state and give fault alarm
中科攪拌車

它的主機多久清洗一次合適呢？

How often is it appropriate to clean the main engine?

一個工作周期內中科攪拌車主機系統少應清洗1次。每天可以生產活動結束后，則應對攪拌車主機信息進行比較全面的清洗，方法是：在清洗服務過程中，將水及少許石子放進攪拌主機內通過攪拌5～10min，清洗后將機內物料管理全部有效，不得有積水、積料;停機后再?zèng)_洗以及管道，攪拌罐內外環境灰塵和粘附的混凝土。一般這種情況下，JS1000型攪拌設備主機之間加水約150～180kg左右，其他產品型號選擇主機可據此分析增減，也可自備高壓水槍或者進行數據清理。

The main engine system of Zhongke mixer should be cleaned at least once in a working cycle. After the end of production activities every day, the information of mixer truck host should be comprehensively cleaned. The method is: in the process of cleaning service, water and a few stones are put into the mixing machine and stirred for 5-10 minutes. After cleaning, all materials in the mixer can be effectively removed, and there is no water and accumulated material; After shutdown, wash and pipe to remove dust and adhered concrete inside and outside the mixing tank. In general, about 150-180kg of water is added between the main machines of JS1000 mixing equipment, and the main machine of other product models can be used to analyze the increase or decrease, or the high-pressure water gun can be provided or the data can be cleaned up.

在沖洗攪拌主機料門時，應避免上部沖洗下的積料形成異物卡滯料門現象。攪拌過程中，若混凝土運輸車較長時間沒有到位(超過20～30min，尤其在夏季)，應加水對攪拌機進行簡易清洗。

When washing the material gate of the mixing machine, it is necessary to avoid foreign matters blocking the material gate caused by the accumulated material under the upper washing. In the mixing process, if the concrete transport vehicle is not in place for a long time (more than 20-30 min, especially in summer), the mixer should be simply cleaned with water.

攪拌車設備正常生產期間，要定期檢查攪拌筒內及攪拌軸上混凝土的凝固情況，如有凝結應及時按要求進行人工鏟除。人工清理攪拌筒前，必須切斷電源、氣路，放凈余氣、鎖好控制室;人工清理攪拌筒時，嚴禁猛烈敲擊攪拌軸、攪拌臂及攪拌葉片。

During the normal production of mixer truck equipment, it is necessary to regularly check the solidification of concrete in the mixing drum and on the mixing shaft. If there is condensation, it should be removed manually according to the requirements. Before manually cleaning the mixing drum, the power supply and gas path must be cut off, the residual gas must be released, and the control room must be locked; when manually cleaning the mixing drum, it is strictly forbidden to knock the mixing shaft, mixing arm and mixing blade violently.

自動上料攪拌機用沖洗充電門，上部沖洗避免夾在充電門的現象形成的異物積累的材料時的攪拌主機設備?；旌线^(guò)程中，如果不再有在現澆混凝土卡車（超過20?30分鐘，尤其是夏天），水應加入攪拌機，便于清洗。

The automatic charging mixer is used to flush the charging door, and the upper part is used to wash the mixing host equipment to avoid the accumulation of foreign matters formed by the phenomenon of clamping in the charging door. During the mixing process, if there is no longer a cast-in-place concrete truck (more than 20? 30 minutes, especially in summer), water should be added to the mixer for easy cleaning.

以上就是”中科攪拌車主機多久清理一次好呢”介紹，希望對大家有所幫助，如想了解更多資訊內容請點擊我們的網站：http://www.zvmc.cn。

The above is the introduction of "how often to clean up the main engine of China Science and technology mixer". I hope it can help you. For more information, please click our website: http://www.zvmc.cn 。

下一篇：自動上料攪拌車如何維持燃油系統？上一篇：如何清理中科攪拌機發動機艙油泥呢？