混凝土攪拌車構造簡略、操作便當，但是作業中也有很多小疑問出現。雖然是小疑問，我們也要找個原因，徹 底。盲目檢查不只糟蹋時間而且還不一定能徹 底鏟除。對于混凝土攪拌車正常作業時不卸料的缺點，我們給你幾個檢查方法，看終究是什么原因構成的。

The structure of concrete mixer is simple and easy to operate, but there are many small questions in the operation. Although it's a small question, we need to find a reason and solve it thoroughly. Blind inspection not only wastes time, but also may not be eradicated completely. For the shortcomings of concrete mixer truck not unloading during normal operation, we will give you a few inspection methods to see what is the cause after all.

混凝土攪拌車的在出產過程中，遇到不卸料的表象，很多用戶當遇到這種缺點時，一般都會認為是混凝土攪拌車出現缺點了，會去檢查攪拌車，檢查后發現 混凝土攪拌車并沒有缺點，這樣就糟蹋了出產時間。 混凝土攪拌車在正常情況下，攪拌時間到零后攪拌車遇自動卸料，但是在出產過程中按下了操作臺上的暫停按鈕后到了攪拌時間，攪拌車沒有卸料。這時候要先檢查 混凝土攪拌車的卸料門上的電磁閥，看電磁閥是不是損壞，電磁閥損壞了卸料門就會打不開，攪拌車天然不會卸料，需要對電磁閥進行修理。若不是電磁閥的缺點時就需要檢查操作臺上的暫停按鈕是不是按下，若沒有按下就按下。若操作臺上的按鈕也沒有疑問就需要檢查計算機的監控界面，看監控界面上的阻止出料控制是不是被，若被當即吊銷。若以上都沒有疑問就是 混凝土攪拌車壞掉了，就需要對攪拌車進行檢查。
                           

In the production process of concrete mixer, the appearance of no unloading is encountered. When many users encounter this kind of defect, they generally think that the concrete mixer has defects, and they will check the mixer. After checking, they find that the concrete mixer has no defects, which wastes the production time. Under normal conditions, when the mixing time reaches zero, the concrete mixer will discharge automatically. However, when the pause button on the operation platform is pressed in the production process, the mixer will not discharge when the mixing time is up. At this time, it is necessary to check the solenoid valve on the discharge door of the concrete mixer first to see if the solenoid valve is damaged. If the solenoid valve is damaged, the discharge door will not open. The mixer will not discharge naturally, so the solenoid valve needs to be repaired. If it is not the defect of the solenoid valve, you need to check whether the pause button on the console is pressed. If not, press it. If there is no doubt about the button on the console, you need to check the monitoring interface of the computer to see if the stop discharge control on the monitoring interface is activated. If it is activated, it will be revoked immediately. If there is no doubt that the concrete mixer is broken, it is necessary to check the mixer.

以上內容就是混凝土攪拌車廠家?guī)淼慕榻B，感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：自上料攪拌車廠家http://www.zvmc.cn。

The above content is the introduction of concrete mixer manufacturer, thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: from loading mixer manufacturer http://www.zvmc.cn .